How to properly shift a motorcycle? The motorcycle shift pedal lever manufacturer tells you that some friends do not know this very well. Today we will teach you how to shift a motorcycle.

The motorcycle gearing method is as follows:
1. First, the gear should be started from the bottom gear, and then the locomotive will change to a high gear and downshift according to the actual situation such as road conditions.
2. The manufacturer of motorcycle shift pedal lever tells you not to add oil when shifting gears (otherwise the engine will idle and make a big roar). Match the gears. When the speed comes up, quickly squeeze the clutch and change gears at the same time. As long as you don't drag the gear, try to use the high gear, and then quickly release the clutch.
3. The key to shifting gears is the timing of the accelerator and the clutch. The motorcycle shift pedal lever manufacturer tells you that when you need to drive at a constant speed, it is necessary to gradually become proficient in choosing high-end and low-speed rotation.
4. When starting, hang in a low gear, such as gear 1 or 2, increase the accelerator to about 2000~3000 rpm and stabilize it, and slowly loosen the left hand clutch. The manufacturer of the motorcycle shift pedal lever tells you not to be too fast or too slow, and loosen it to half. When the time is steady, combined with the right-hand accelerator to add it smoothly, it is about a few meters away, and the clutch is gradually released, so that it is not so easy to turn off the engine.