To operate the dirty bike brake pedal, hold the steering wheel flat, release the accelerator pedal, put your foot on the brake pedal, and depress the brake pedal. Predictive braking in use, under the premise of ensuring safety, use the drag effect of the engine to reduce the speed of the vehicle, so as to use less braking, try to avoid the use of emergency braking, and reduce brake wear.

There are four ways to use the dirt bike brake pedal:
1. The method of braking first and then releasing: in case of emergency, first step on the brake pedal quickly, then slowly step on the second brake pedal, then slowly lift the brake pedal according to the actual situation, and then According to the speed of the vehicle, dial the shift handle to the appropriate gear, cooperate with the accelerator pedal, and resume normal driving.
2. Continuous braking method: The manufacturer of the dirty bike brake pedal tells you to relax the accelerator pedal in advance to slow down the car in the event of a situation, and at the same time depress the brake pedal slowly and continuously, which can reduce the impact caused by emergency braking.
3. Point braking method: This braking method is usually used on rainy or muddy roads. Point braking is to gently step on the brake pedal with the right foot. It can reduce the directional loss of control due to the locked wheels, and at the same time obtain a larger braking force.
4. Emergency braking method: The manufacturer of dirty bike brake pedal tells you that this braking method is used in very emergency situations. When braking, the left hand should hold the steering wheel tightly, and the right foot should quickly step on the brake pedal to the end. If necessary, apply the parking brake at the same time to stop the car as soon as possible.