Today, the manufacturer of dirt bike Voltage Regulator will show you how to use the voltage regulator. Many people don’t know the steps of using the voltage regulator. Let’s take a look now!

1. First, according to the power of the voltage stabilizer purchased, it can be calculated at 0.75 square millimeters per kilowatt. The dirt bike Voltage Regulator manufacturer tells you the proper wires to use to connect the voltage regulator's input and output.
2. Connect the power supply of the electrical equipment to the output terminal of the equipment. Pay attention to whether the applicable voltage of the equipment is 220V or 110V. Don't get it wrong.
3. All line interfaces of the output line must be connected, otherwise the line will be heated by a large current, which will affect the effective power.
4. When the output voltage exceeds the protection value of the regulator, the regulator will automatically protect, reduce or cut off the output voltage of the regulator, and the overvoltage indicator will light up. The user should immediately shut down and check the grid voltage or voltage regulator.
This is the end of this article, the manufacturer of dirt bike Voltage Regulator hopes to be helpful to everyone.